Name: TePe GOOD Tongue Cleaner
Brand: TEPE
SKU: 180-0126P13403S
Price: 9.3 GBP
Availability: InStock

TePe GOOD Tongue Cleaner

The TePe GOOD™ Tongue Cleaner is part of the unique TePe GOOD™ range made from bio-based plastic – without compromising on product quality, efficiency or design.

TePe GOOD™ Tongue Cleaner is designed to remove bacteria on the tongue to improve oral health and prevent bad breath. The design corresponds to the natural shape of the tongue, which reduces the gag reflex and makes it easier to reach far back in the mouth. The three, slightly raised cleaning blades give a triple-effect, meaning that bacteria is removed in one stroke. The tongue cleaner is dishwasher safe.

Made of bio-based plastic
Three blades for a triple cleaning effect
Helps prevent bad breath (halitosis)
Dishwasher safe

Directions

Directions to replace a lost filling:

Wash the cavity area with warm water and do not dry. Cut with spade tool or pinch a small amount of Temparin Max from the vial, and roll into a ball between fingers. Slightly overfill the cavity with Temparin Max and tamp into place with applicator tool tip. Close your teeth together, as if you were biting down on a piece of paper, and gently chew or grind on the replaced filling a couple times to create a comfortable bite. Use a moist cotton swab to remove excess Temparin Max from around the area. Moisture will accelerate the set. Temparin Max will set softly in your mouth within a few minutes, but avoid chewing on the repair for 2-3 hours to allow the material to fully set.

Directions to secure loose crowns, caps, or inlays:

Try the crown, cap, or inlay first to see if you can fit it accurately back onto the tooth surface. If you are not able to do so, or if remaining tooth is cracked, then do not proceed further. If the crown has a post attached to it or if there is tooth surface remaining inside the crown, Temparin Max may not adhere. Carefully rinse the tooth area and the inside of the crown, cap, or inlay with warm water, and do not dry. Cut with spade tool or pinch a small amount of Temparin Max from the vial, roll into a ball between fingers, and place evenly inside the crown, cap, or inlay. Place the crown, cap, or inlay on the tooth and bite down, applying pressure to push into position. Temparin Max will begin to harden within a few minutes, but avoid chewing on the repair for at least 2-3 hours to allow the material to set. Use a toothbrush to gently clear any excess material from around the crown, cap, or inlay.

Ingredients

Zinc Oxide Powder, Calcium Sulfate, Petroleum Jelly, Potassium alum, Paraffin, Aluminum Sulphate, Aluminum Phosphate, Menthol Crystals, Eugenol, Yellow Iron Oxide.

Warnings

To avoid infection and/or serious injury, this product should not be used if there is throbbing pain, ulceration or swelling in the affected area. If any of these symptoms exist, consult your dentist immediately. This product should not be placed on open wounds. Do not use if allergic to Eugenol.

READ ALL OF THE DIRECTIONS CAREFULLY BEFORE USE!

Wash and dry your hands. Do not get unused Temparin Max wet. Use only what is needed to repair the dental emergency, and save the rest for a future application.

KEEP OUT OF REACH OF CHILDREN.

Indications

Perfectly suited for all types of 2-viscosity impressions:

Wash technique: two-step impression
Double mixing: imprint in one time.

Properties

Excellent dimensional stability
Very accurate reproduction of details
Elastic memory greater than 99%
Hydrocompatibility: high accuracy of impressions even in the presence of gum fluid or bleeding
Perfect thixotropy
Easy and tear-free disinsertion
Perfect chemical adhesion between materials
Impressions can be immersed in disinfectant solutions without dimensional alterations
Compatible with all plasters
Absence of microporosities.

Self-mixing system that guarantees a perfect dosage with a homogeneous mixture, as well as a regular setting time.

Characteristics

Mixing time: automatic mixing
Working time: 1 min 30 sec
Time taken in the mouth: 2 min 30 sec
Shore A hardness: 53 ± 2
Green colour

Indications

Perfectly suited for all types of 2-viscosity impressions:

Wash technique: two-step impression
Double mixing: imprint in one time.

Properties

Excellent dimensional stability
Very accurate reproduction of details
Elastic memory greater than 99%
Hydrocompatibility: high accuracy of impressions even in the presence of gum fluid or bleeding
Perfect thixotropy
Easy and tear-free disinsertion
Perfect chemical adhesion between materials
Impressions can be immersed in disinfectant solutions without dimensional alterations
Compatible with all plasters
Absence of microporosities.

Self-mixing system that guarantees a perfect dosage with a homogeneous mixture, as well as a regular setting time.

Characteristics

Mixing time: automatic mixing
Working time: 2 min
Time taken in the mouth: 3 min 30 sec
Shore A hardness: 53 ± 2
Blue colour

siliperfect-AD II is a vinyl polysiloxane silicone elastomer that cross-links by an addition reaction. The hydrophilic properties of siliperfect-AD II enable enhanced precision and reduced risk of voids forming due to presence of saliva. The mechanical properties of the cured material are excellent as is the reproduction of details.

Indications

For use in all 2 viscosity impression types.
Wash technique
Double mixing

Properties

Excellent dimensional stability
Thixotropic
Hydrocompatibility: impressions are always highly precise, even when contact with gingival fluid and bleeding
High elastic memory
Compatible with all plasters.

Characteristics

Mixing time: 30 sec
Working time: 2 min
Time taken in the mouth: 3 min 30 sec
Shore A hardness: 60 ± 2
Colour: Sandy

Properties

Dynamic fluidity.
Excellent thixotropy which prevents it from running.
Perfect reproduction of details.

Characteristics

Mixing time: 30 seconds.
Total manipulation time: 1 minute 30 seconds.
Minimum time in the mouth: 4 minutes.
Total setting time: 5 minutes 30 seconds.
Blue colour.

Properties

Ability to spread in pellicular form.
Absence of any deformation of the primary impression.
Faithful reproduction of details.

Characteristics

Mixing time: 30 s
Total handling time: 1 min 30 s
Minimum time in the mouth: 4 min
Total setting time: 5 min 30 s
Colour: blue.

Properties

Reduced final hardness for comfortable removal from the oral cavity.
Excellent resilience guarantees precise jaw models.
Optimal for taking impressions of severe undercut areas.
Smooth kneading and gentle application in the patients’ mouth.
The C-Silicone with A-Silicone qualities – 7 days dimensional stability.

Indications

Primary impression in the putty-wash impression technique.
Pick-up impression in the simultaneous mixing technique.
Impressions for study models, orthodontic models, keys and protective isolation of teeth during fitting of prostheses.

Siliperfect-AD II is a vinyl polysiloxane silicone elastomer that cross-links by an addition reaction. The hydrophilic properties of Siliperfect-AD II enable enhanced precision and reduced risk of voids forming due to presence of saliva. The mechanical properties of the cured material are excellent as is the reproduction of details.

Indications

For use in all 2 viscosity impression types.
Wash technique
Double mixing

Properties

Excellent dimensional stability
Thixotropic
Hydrocompatibility: impressions are always highly precise, even when contact with gingival fluid and bleeding
High elastic memory
Compatible with all plasters.

Characteristics

Mixing time: 30 sec
Working time: 1 min 30 sec
Time taken in the mouth: 2 min 30 sec
Shore A hardness: 60 ± 2
Colour: Purple

Acquaint yourself with the new standard of care. The nano-hybrid composite Venus Pearl completes the natural colour concept and the excellent physical properties that have already been offered with Venus Diamond. It delivers a soft consistency during modelling. The secret to Venus Pearl’s greater malleability is the adapted filler system.

Your aesthetic restorations are the secret behind your patient's smile.

Easy and convenient handling: Venus Pearl combines a creamy consistency and minimal stickiness with simultaneously exceptional high sculptability. It offers an extended working time and is perfect to model and polish.
Outstanding physical properties: The material combines high flexural strength with minimal shrinkage stress. You obtain long-lasting, aesthetically pleasing restorations with a permanent, natural lustre.
Impressive aesthetics: Venus Pearl offers a wide range of shades and can be applied in single- and multi-shade layering techniques. The material adapts perfectly to the colour of the surrounding teeth, creating an outstandingly natural look.

Saliva Check Buffer kit is divided into 5 different steps, the first 3 steps involving unstimulated saliva while the last 2 steps involve the stimulated saliva.
As the functions and characteristics of these two forms of saliva are different, by evaluating both, the test results will become very useful diagnostic and powerful communication tools to the patients.

Indications

Saliva-Check Buffer is very useful to identify contributing factors like stress, smoking, disease, salivary gland pathology, chronical renal failure, drug abuse, menopausal hormone imbalance and medicine side effect. The results can be explained to the patient as part of the discussion about prevention and treatment.

Advantages

Checks the flow rate, viscosity and consistency of non-stimulated saliva.
Checks the pH of the patient’s resting saliva. This will determine whether acid levels may be dangerously high, hence possibly causing erosion or caries problems.
Checks the quantity of stimulated saliva a patient can produce. This enables you to identify any major salivary gland diseases.
Checks the buffering capacity (quality) of stimulated saliva.

Clinical Indications

After complex extractions.
Before/After implant surgery.
Before/After bone regeneration.

Usage

Rinse for one minute with 10ml undiluted solution.
Use 7-14 days prior to and after surgery.

Dehydration and oral dryness can easily affect healthy individuals as a result of a number of common lifestyle factors (e.g. caffeine intake, alcohol and nicotine consumption). Furthermore, many major medical disorders are associated with Xerostomia (Sjögren syndrome, Diabetes, Radiotherapies). On top, over 300 medications can induce xerostomia – including those which are self-administered and ‘over the counter’ medications such as expectorants, decongestants and prescription medicines.

Have any of your patients complained of the following symptoms?

Dry Mouth
Difficulty in swallowing
Bad taste / Halitosis
Difficulty in speaking

Have you noticed any of the following signs?

Soft Tissue changes – dryness of the mucosa, cratering and plaque formation on the tongue
Hard Tissue changes – increased caries rate, erosion, hypersensitivity, greater accumulation of plaque

To enable an easier assessment of dry mouth patients, kits such as the Saliva Check Buffer can be very useful. This is a straightforward 5 step test that delivers valuable, individualised information relating to the pH, quantity and buffering capacity of saliva.

Immediate relief – whenever, wherever: GC Dry Mouth Gel.

Dry Mouth Gel is a unique, sugar free product that comes in four delicious flavours. It is designed to help relieve dry mouths to provide long lasting comfort and a soothing effect for patients.

This transparent gel comes in a compact tube that will easily fit into either a pocket or handbag, meaning it can be used whenever and wherever it is needed. All that is required is for the patient to apply a generous amount of the gel with a clean finger over the buccal and lingual surfaces of the teeth and oral mucosal tissues.

Uniquely, unlike most saliva substitutes, Dry Mouth Gel has a neutral pH, meaning that effective symptomatic relief can be provided, whilst preserving oral pH within the safe range to prevent demineralisation.

bioXtra Dry Mouth Mild Toothpaste gently supplements natural saliva by regulating the micro-environment of the mouth. The mild tasting formulation guards against plaque build-up, strengthens enamel, helps prevent the formation of dental caries and ease the symptoms and effects of Dry Mouth (xerostomia). It helps maintain a healthy mouth and promote fresh breath.

bioXtra Dry Mouth Mild Toothpaste has a low foaming effect.

Natural saliva contains a complex balance of essential components, which protect the sensitive tissues of your teeth and gums.

Any reduction in saliva flow can lead to a condition known as Dry Mouth, or clinically called Xerostomia. Dry Mouth disturbs your mouth’s natural balance and may contribute to discomfort, poor oral health, bad breath and even affect your general health and well-being.

bioXtra products help ease the symptoms and effects of Dry Mouth (xerostomia). They contain natural enzymes ( Lactoperoxidase, Glucose oxidase, Lysozyme), Lactoferrin, Colostrum whey extract, Moisturisers, Fluoride (except for the Oral Gel) and Xylitol.

Used twice daily, Listerine provides 24-hour protection against plaque. Listerine contains a combination of essential oils, which have been clinically proven to reduce plaque development by up to 56%. Studies have also shown that Listerine reduces 48% more plaque from in-between teeth than brushing and flossing alone.

bioXtra Dry Mouth Ultra Mild Mouthrinse gently supplements natural saliva by regulating the microenvironment of the mouth. The mild tasting formulation strengthens enamel, helps fight against the formation of dental caries and ease the symptoms and effects of Dry Mouth (xerostomia). It helps maintain your mouth’s natural balance and cleanse, refresh and lubricate your mouth.

bioXtra Dry Mouth Ultra Mild Mouthrinse is alcohol and menthol free.

Natural saliva contains a complex balance of essential components, which protect the sensitive tissues of your teeth and gums.

Any reduction in saliva flow can lead to a condition known as Dry Mouth, or clinically called Xerostomia. Dry Mouth disturbs your mouth’s natural balance and may contribute to discomfort, poor oral health, bad breath and even affect your general health and well-being.

bioXtra products help ease the symptoms and effects of Dry Mouth (xerostomia). They contain natural enzymes ( Lactoperoxidase, Glucose oxidase, Lysozyme), Lactoferrin, Colostrum whey extract, Moisturisers, Fluoride (except for the Oral Gel) and Xylitol.

Most dental rinses rely on bleach, chlorhexidine, EDTA, or hydrogen peroxide to kill oral viruses and bacteria: toxic chemicals known to inhibit effective recovery. OraWize+ offers a high level performance and safety to protect against infection. A complete, non-irritating, non-sensitising antimicrobial HOCl dental rinse that can be used pre-procedure to reduce microbial load, during dental treatment for endodontic and periodontal irrigation and post-procedure to support the oral healing process.

Performance

Unique formulation eliminates harmful organisms before, during, and after treatment in under a minute
Provides perfect healing conditions by keeping bacteria and biofilm at bay
As effective as hypochlorite at destroying efaecalis in endodontic treatment
Helps manage dry sockets
Non staining, ready to use formula, stabilised for an extended HOCl shelf life
Convenient sizes: 1L and 5L bottles. 250ml option for patient’s post-treatment recovery at home

Safer

Ideal for use with vulnerable and immunocompromised patients
Does not irritate mucous membranes or respiratory system
Harmless to oral and periodontal tissue and surrounding structures
Tooth safe, thanks to neutral pH
The first HOCl dental rinse CE-marked as a Medical Device
Meets stringent European standards for killing viruses (BS EN 14476)
Free from alcohol and artificial preservatives