Medibase Brown Mixing Tips + Thin Tips (50)

Brown 1:1 ratio mixing tips with thin tips for composite and adhesive materials

Compatible with:

• TempBond
• Integrity TempGrip
• DentoTemp
• Clearfil Esthetic Cement
• NX3
• Bifix QM
• DentoCem
• MultiLink Automix
• DentoCore Automix

Contents

• 50 x Mixing Tips
• 50 x Thin Tips

Take 1 Advanced: Bite Registration - 2 x 50ml

Take 1™ Advanced™ VPS Bite Registration Material combines Kerr’s expertise in developing high-performance impression materials with recent technological advancements.

• Outstanding tear strength and elongation.
• Displaces intraoral fluids to produce impressions with great detail and without voids or gaps.
• Excellent dimensional stability.
• Impressions will not distort due to dimensional change or temporary deformation.

Contents

• 2 x 50ml cartridges of Take 1 Advanced Bite Registration
• 6 x Large Mixing Tips
• 6 x Bite Registration Intra-Oral Tips

Medibase Blue Sharp Point Mixing Tips (50)

Blue 1:1 ratio mixing tips with sharp points for composite and adhesive materials

Compatible with:

• DentoCrown
• Structures 2
• ParaCore
• Turboflex Light
• Express/Express 2 Light
• SiliPerfect Light
• Provil Novo Light
• Affinis
• Aquasil Ultra Light
• Elite HD Light
• Futar D
• Jet Blue Bite
• Imprint Bite
• Memoreg Memosil
• Clinibite
• Occlufast Rock
• ColorBite

Contents

• Pack of 50

Clinix Clinibite Kit: Fast - 2 x 50ml + Tips

Clinibite is an addition silicone bite registration material used for recording:

• The maximum intercuspid position.
• The centered relationship.
• Reports of intermaxillary articulation.
• For single-phase sectoral dental impression in "bite".

Clinibite has outstanding qualities for the realization of your dental impressions.

Properties

• High thixotropy: easy control of the application on occlusal surfaces.
• Precision: 2 microns: faithfully reproduces the smallest details of occlusion.
• High dimensional stability: 0.05% after 24 hours.
• Avoids model repositioning errors and overocclusions.
• Cutting, easy milling.
• Comfortable for the patient.
• No distortion

Characteristics

• Working time: 30 seconds
• Time taken in the mouth: 60 seconds
• Total setting time: 1 min 30 seconds
• Colour: Green

Contents

• 2 x 50ml cartridges
• 12 x mixing tips

Medibase Intra-Oral Tips (100)

Yellow intra-oral tips to fit mixing tips for addition silicone cartridge materials

Contents

• Pack of 100

Medibase Etching Needle Tips (50)

0.5mm diameter needle tips for etching gels

Contents

• Pack of 50

3M Espe Elastomer Syringe

Provides easy syringing of light body handmix impression material around the teeth.

Contents

• 1 x Elastomer Syringe with 3 Replacement Tips
• 1 x Cleaning Brush
• 1 x Filling Device 

Dentsply Sirona Red Intra-Oral Tips - For 50ml LV/XLV (100)

New and improved mixing tips from Dentsply Sirona.

• Less mixing tip waste. New level of savings. This new innovative system reduces material waste by up to 64%.
• New level of technology. New level of mix quality. The unique design of the Stonehenge mixing chamber and mixing cube technology offers a consistent homogenous mix. This ensures proper product performance through the life of the impression cartridge.
• New smaller mixing tip for low viscosity materials. Enjoy a new, smaller mixing tip for the low viscosity materials, increasing their material savings.
• Bleed only once (before first use) for the life of the cartridge. No need to bleed between use.
• Easy assembly with the new twist tab and alignment key. The alignment key also helps in reducing risk of cross contamination between the base and catalyst sides of the impression cartridge.
• Colour Coded cartridge>tip system to clearly indicate which colour mixing tips connect to which cartridge materials.

Contents

• 100 x Dentsply Sirona Red Intra-Oral Tips - For 50ml LV/XLV

Medibase Red Spiral Mixing Tips (50)

Blue 2:3 and 1:3 ratio mixing tips with red spiral for composite or crown and bridge materials

Compatible with:

• ProTemp 3 & 4
• Integrity
• Cool Temp

Contents

• Pack of 50

Kulzer Universal Adhesive

Adhesive for silicone impression material. For all Kulzer silicone impression materials.

Contents

• 1 x 10ml bottle

LuxaBite - 50ml Cartridge

The hardest among all bite registration materials is based on the innovative bisacrylate formula. Its thixotropic properties prevent the material from running into interdental spaces, and its superior final hardness (Shore D-69, or Barcol 25) eliminates compression or flexing when mounted to facilitate precise bite registrations.

Even implantologists appreciate the material’s advantages and use LuxaBite for the fixation of multiple impression posts to obtain torsion-free implant impressions.

And, besides LuxaBite’s stability when positioned on the model, dental assistants also value the conveniently easy excess removal with a dental bur.
After all, the material should be hard, not the work.

• The hardest bite registration material (Barcol hardness 25 after one hour).
• No compression or flexing when repositioned on the model.
• Tasteless and odourless.
• Excellent stability.
• Easy to cut. 

With its outstanding rigidity LuxaBite provides the prerequisite for a precise reproduction of the oral situation, enabling the dentist to integrate perfectly fitting restorations without the need for corrections.

For the laboratory a torsion-free impression of transfer caps or impression posts taken by an implantologist is the necessary foundation for the fabrication of a perfectly fitting supra-construction.

LuxaBite’s extreme hardness combined with the user-friendly application with the Automix guarantees a reliable fixation.

Indications

• Bite registration, fixation of impression posts or transfer caps for implant impressions

Features & Benefits

• Very high final hardness - No compression or flexing when mounted onto the model and outstanding milling properties.
• No taste or odour - Increased patient comfort.
• Barely perceptible resistance when jaw is closed - Exact and reliable registration of the occlusion.
• Outstanding stability - No running into interdental spaces.
• Intensive blue colouring - Good colour contrast.

Contents

• 1 x 50ml cartridge of LuxaBite
• 15 x Automix tips

LuxaBite - Economy Pack: 5 x 50ml Cartridges

The hardest among all bite registration materials is based on the innovative bisacrylate formula. Its thixotropic properties prevent the material from running into interdental spaces, and its superior final hardness (Shore D-69, or Barcol 25) eliminates compression or flexing when mounted to facilitate precise bite registrations.

Even implantologists appreciate the material’s advantages and use LuxaBite for the fixation of multiple impression posts to obtain torsion-free implant impressions.

And, besides LuxaBite’s stability when positioned on the model, dental assistants also value the conveniently easy excess removal with a dental bur.
After all, the material should be hard, not the work.

• The hardest bite registration material (Barcol hardness 25 after one hour).
• No compression or flexing when repositioned on the model.
• Tasteless and odourless.
• Excellent stability.
• Easy to cut.

With its outstanding rigidity LuxaBite provides the prerequisite for a precise reproduction of the oral situation, enabling the dentist to integrate perfectly fitting restorations without the need for corrections.

For the laboratory a torsion-free impression of transfer caps or impression posts taken by an implantologist is the necessary foundation for the fabrication of a perfectly fitting supra-construction.

LuxaBite’s extreme hardness combined with the user-friendly application with the Automix guarantees a reliable fixation.

Indications

• Bite registration, fixation of impression posts or transfer caps for implant impressions

Features & Benefits

• Very high final hardness - No compression or flexing when mounted onto the model and outstanding milling properties.
• No taste or odour - Increased patient comfort.
• Barely perceptible resistance when jaw is closed - Exact and reliable registration of the occlusion.
• Outstanding stability - No running into interdental spaces.
• Intensive blue colouring - Good colour contrast.

Contents

• 5 x 50ml cartridge of LuxaBite
• 75 x Automix tips

Medibase Yellow Mixing Tips (100)

1:1 ratio yellow mixing tips for addition silicone cartridge materials

Compatible with:

• DentoCrown
• Structures 2
• ParaCore
• Turboflex Light
• Express/Express 2 Light
• SiliPerfect Light
• Provil Novo Light
• Affinis
• Aquasil Ultra Light
• Elite HD Light
• Futar D
• Jet Blue Bite
• Imprint Bite
• Memoreg Memosil
• Clinibite
• Occlufast Rock
• ColorBite

Contents

• Pack of 100

ImpressPLUS Wash - Light Body Fast Set 2 x 50ml

ImpressPLUS Light Body Wash from Perfection Plus is a vinyl polysiloxane impression material with excellent tear strength to maintain integrity on removal.

ImpressPLUS Light Body is recommended as a wash (correction) material in either single step (sandwich) or double step techniques.

• Working time: 1 minute
• Setting time: 1 minutes

Contents

• 2 x 50ml cartridges of ImpressPLUS Light Body Fast Set
• 6 x yellow mixing tips
• 6 x yellow intra-oral tips

• Easy automatic mixing and delivery of impression materials with this handgun cartridge.
• Consistent material characteristics with void-free mixing and direct intraoral application.

• Mixing and dispensing impression materials.

• Cartridge Dispenser 1:1/2:1 Dispenser with plunger (1)

Impress-E Putty - Hard 2 x 300ml

Impress-E Putty from Perfection Plus is an A-Silicone impression material that has a long working time giving dentists maximum control, whilst the short setting time ensures maximum patient comfort.

• Working time: 4 minutes 45 seconds
• Setting time: 2 minutes 15 seconds
• Viscosity: Hard

Contents

• 1 x 300g base
• 1 x 300g catalyst
• 2 x colour coded scoops

3M Espe Elastomer Syringe Application Tips (12)

• Allows for easy, intraoral delivery of Penta impression materials and Impregum F impression material.
• For Medium Viscosity materials.
• For use with the Impregum™ F Elastomer Syringe and Penta™ Elastomer Syringe

Contents

• Pack of 12

Protemp Crown Temporisation Material Trial Kit

Protemp Crown is the world’s first aesthetic, malleable, single unit temporary crown - with the ability to deliver a custom fit in 4 minutes or less.

Indications

• Short-term, temporary posterior restorations
• Permanent teeth prepared for single unit crowns
• Molars, bicuspids and cuspids
• Implant temporaries.

Features

• No matrix or impression, hardware or mixing tips required
• Excellent mechanical strength, high fracture resistance
• Protemp Crown can be polished to a shiny tooth-like appearance
• Helps maintain very good gingival health
• Anatomical shapes similar to natural dentition.

Benefits

• Simple technique, easy to use
• Chair time can be reduced by 50% for a single unit temporary
• Strong temporary, up to a 3 week placement
• Aesthetic finished result
• Less follow-up appointments

Contents

• 16 x Temporary Crowns
• Crown Size Tools (1 bag of 10)
• Instructions
• Technique Guide
• CD

Pegasus Impression Trays: Large Upper (25)

Pegasus Impression Trays are disposable blue plastic impression trays with perforations and grooves for maximum retention of impression material.

• Rigid plastic for greater accuracy.
• Integral handle.
• Deep sulcus.
• Perforated and grooved for maximum retention of impression material.

Contents

• Pack of 25 x Pegasus Impression Trays in size large upper

The duomix II dynamic mixing of Aquasil Ultra provides superb consistency of the 5-star impression material. This is the easiest and fastest way of getting the bulk benefits of Aquasil Ultra DECATM 380 hard cartridges.

• Fast extrusion speed with an average of 46 mm/sec
• 'Turbo-Button' for doubled speed with Aquasil Ultra Monophase and Heavy
• Steady extrusion rate, even for highly viscous materials
• Optimized cartridge bed for even more convenient handling

ImpressPLUS Bite Registration: Super Fast Set 2 x 50ml

ImpressPLUS Bite Registration from Perfection Plus is a thixotropic vinyl polysiloxane material used for bite registration, a quick die for temporary inlays and onlays, copying transfers and primary impression with bite trays.

ImpressPLUS Bite Registration offers outstanding handling for occlusal registration every time with a light blue mousse like material that does not compress or flex.

• Working time: 30 seconds
• Setting time: 30 seconds

Contents

• 2 x 50ml cartridges of ImpressPLUS Bite Registration in Super Fast Set
• 6 x green mixing tips

ImpressPLUS Yellow Intra-Oral Tips (100)

ImpressPLUS Yellow Intra-Oral Tips from Perfection Plus fit 4.2mm mixing tips and are used to precisely dispense impression materials.

Contents

• Pack of 100 x ImpressPLUS Intra-Oral Tips

ImpressPLUS Yellow Mixing Tips (50)

ImpressPLUS Yellow Mixing Tips from Perfection Plus are 1:1 ratio mixing tips for use with light body and medium body impression materials.

Contents

• Pack of 50 x ImpressPLUS Yellow Mixing Tips

Kerr Impression Compound: Red - 15 Sticks

Kerr Impression Compound for full or partial impressions or copper bands/tracing.

Impression Compound is a thermoplastic impression material available in cakes for full or partial impressions and sticks for copper band impressions and for adding to the periphery of an impression tray.

Each coloured variant has a controlled working temperature.

INDICATIONS

• Red: for copper rings and bite registration. Fusion temperature: 55-56°C.
• Green: for copper rings and peripheral joints. Fusion temperature: 50-51°C.

CONTENTS

• 15 sticks of Kerr Red Impression Compound

Blu-Mousse Impression Paste Tubes

Blu-Mousse from Parkell is a precision bite registration material with exceptional accuracy and a dependable no-slump consistency.

• Exceptional accuracy.
• Plaster-like hardness (85-durometer.
• Dependable no-slump consistency.
• Choice of setting speeds. From conventional bite registration techniques to modern-day digital impressions Blu-Mousse does it all.

Contents

• 2 x 228g tubes (Base & Catalyst)

Kerr Impression Compound: Red - 8 Cakes

Kerr Impression Compound for full or partial impressions or copper bands/tracing.

Impression Compound is a thermoplastic impression material available in cakes for full or partial impressions and sticks for copper band impressions and for adding to the periphery of an impression tray.

Each coloured variant has a controlled working temperature.

• Fusion temperature: 55-56°C.
• Fusion temperature: 50-51°C.

CONTENTS

• 8 cakes of Kerr Red Impression Compound

Kerr Impression Compound: Green - 15 Sticks

Kerr Impression Compound for full or partial impressions or copper bands/tracing.

Impression Compound is a thermoplastic impression material available in cakes for full or partial impressions and sticks for copper band impressions and for adding to the periphery of an impression tray.

Each coloured variant has a controlled working temperature.

Indications

• Red: for copper rings and bite registration. Fusion temperature: 55-56°C.
• Green: for copper rings and peripheral joints. Fusion temperature: 50-51°C.

Contents

• 15 sticks of Kerr Green Impression Compound

Dentsply Sirona Dynamic Mixing Tips - For DECA 380 Material (45)

New and improved mixing tips from Dentsply Sirona.

• Less mixing tip waste. New level of savings. This new innovative system reduces material waste by up to 64%.
• New level of technology. New level of mix quality. The unique design of the Stonehenge mixing chamber and mixing cube technology offers a consistent homogenous mix. This ensures proper product performance through the life of the impression cartridge.
• New smaller mixing tip for low viscosity materials. Enjoy a new, smaller mixing tip for the low viscosity materials, increasing their material savings.
• Bleed only once (before first use) for the life of the cartridge. No need to bleed between use.
• Easy assembly with the new twist tab and alignment key. The alignment key also helps in reducing risk of cross contamination between the base and catalyst sides of the impression cartridge.
• Colour Coded cartridge>tip system to clearly indicate which colour mixing tips connect to which cartridge materials.

Contents

• 45 x Dentsply Sirona Dynamic Mixing Tips - For DECA 380 Material