ParaBond Adhesive Kit - 3 x 3ml

ParaBond Adhesive is a chemical curing, self-conditioning Adhesive System for enamel and dentin. It consists of a Non-Rinse Conditioner and a chemical-curing adhesive (Adhesive A and B). Instead of the Non-Rinse Conditioner also phosphoric acid can be used.

• Seals the tooth surface and minimizes the risk of postoperative sensitivities.
• Ideal for situations where light might not penetrate, such as for post cementation, metal crowns, deep cavities or opaque ceramic.
• High shear bond strengths on dentine and enamel.
• Applicable with chemically- and dual-curing materials.

Contents

• 1 x 3m ParaBond Non-Rinse Conditioner
• 1 x 3ml ParaBond Adhesive A
• 1 x 3ml ParaBond Adhesive B

mp Bond is a self-curing zinc-oxide eugenol-based temporary dental cement indicated for temporary crowns, bridges or splints for trial cementing permanent restorations.

Its smooth flow means exceptional handling and results in effortless and complete restoration seating.

Indications

• Temporary cement for crowns and bridges.

Properties 

• Quick setting time

Contents

• 50g base
• 15g catalyst

Kerr TempBond - NE

TempBond NE is a self-curing zinc-oxide non-eugenol temporary dental cement indicated for temporary crowns, bridges or splints for trial cementing permanent restorations.

Its smooth flow means exceptional handling and results in effortless and complete restoration seating.

INDICATIONS

• Temporary cement for crowns and bridges.

PROPERTIES 

• Quick setting time

CONTENTS

• 50g base
• 15g catalyst

G2-BOND Universal: Bottle Kit

G2-BOND Universal from GC is an all-round universal 2-bottle system combining what clinicians would expect from existing self-etch (SE) and etch-and-rinse (ER) Gold Standards.

With over 1 billion composite restorations and a century of competence in dental materials, GC is leading the way to new standards in adhesive dentistry. With its proprietary Dual H-Technology, an advanced optimisation of the bonding both to the tooth and the composite is provided in addition to:

• Your choice of preferred etching mode.
• Superior durability and bond strength.
• Superior resistance to marginal staining.
• Superior dispensing and low technique sensitivity.
• Multiple indications.

Evaluations by clinicians worldwide resulted in over 1,500 restorations performed with G2-BOND Universal. The results indicate:

• Remarkable sealing effectiveness with virtually no post-op sensitivity
• 97% satisfaction in SE and ER etching modes
• 98% satisfaction with product handling and dispensing
• 89% satisfaction with the ergonomic bottle design

G2-BOND Universal Dual H-Technology

Challenged to improve on existing 2-bottle benchmarks, GC researchers focused on strengthening the adhesive layer and significantly reducing the potential for water degradation over time. The new GC proprietary Dual-H Technology provides a smooth transition from hydrophilic to hydrophobic characteristics in the primed surface, which is then further strengthened by a truly hydrophobic protective bond layer.

All-round performance of a unique composition:

• 4-MET for a reliable adhesion to enamel & dentin.
• MDP for an excellent adhesion to enamel & dentin, zirconia, alumina and non-precious metals.
• MDTP to bond to precious metals.
• HEMA-free bonding system for a clinically proven outstanding durability .

Modern, intelligent and ergonomic design

G2-BOND Universal is instantly recognisable by its unique bottle covers.

1-PRIMER

• Bottle cover designed for low viscosity & volatile content to ensure controlled dispensing.
• Prevent dripping and eliminate waste of liquid through ingenious cover design.
• 300 applications per bottle.
• Reusability with any new bottles.

2-BOND

• Designed for high viscosity liquids to reduce dispensing force.
• Prevent dripping and eliminate waste of liquid through ingenious cover design.
• 300 applications per bottle.
• Reusability with any new bottles.

Contents

• 1 x 5ml bottle of G2-BOND Universal 1-PRIMER
• 1 x 5ml bottle of G2-BOND Universal 2-BOND
• Accessoires

G2-BOND Universal: Primer Refill - 5ml

G2-BOND Universal from GC is an all-round universal 2-bottle system combining what clinicians would expect from existing self-etch (SE) and etch-and-rinse (ER) Gold Standards.

With over 1 billion composite restorations and a century of competence in dental materials, GC is leading the way to new standards in adhesive dentistry. With its proprietary Dual H-Technology, an advanced optimisation of the bonding both to the tooth and the composite is provided in addition to:

• Your choice of preferred etching mode.
• Superior durability and bond strength.
• Superior resistance to marginal staining.
• Superior dispensing and low technique sensitivity.
• Multiple indications.

Evaluations by clinicians worldwide resulted in over 1,500 restorations performed with G2-BOND Universal. The results indicate:

• Remarkable sealing effectiveness with virtually no post-op sensitivity
• 97% satisfaction in SE and ER etching modes
• 98% satisfaction with product handling and dispensing
• 89% satisfaction with the ergonomic bottle design

G2-BOND Universal Dual H-Technology

Challenged to improve on existing 2-bottle benchmarks, GC researchers focused on strengthening the adhesive layer and significantly reducing the potential for water degradation over time. The new GC proprietary Dual-H Technology provides a smooth transition from hydrophilic to hydrophobic characteristics in the primed surface, which is then further strengthened by a truly hydrophobic protective bond layer.

All-round performance of a unique composition:

• 4-MET for a reliable adhesion to enamel & dentin.
• MDP for an excellent adhesion to enamel & dentin, zirconia, alumina and non-precious metals.
• MDTP to bond to precious metals.
• HEMA-free bonding system for a clinically proven outstanding durability .

Modern, intelligent and ergonomic design

G2-BOND Universal is instantly recognisable by its unique bottle covers.

1-PRIMER

• Bottle cover designed for low viscosity & volatile content to ensure controlled dispensing.
• Prevent dripping and eliminate waste of liquid through ingenious cover design.
• 300 applications per bottle.
• Reusability with any new bottles.

2-BOND

• Designed for high viscosity liquids to reduce dispensing force.
• Prevent dripping and eliminate waste of liquid through ingenious cover design.
• 300 applications per bottle.
• Reusability with any new bottles.

Contents

• 1 x 5ml bottle of G2-BOND Universal 1-PRIMER

G-aenial A'CHORD & G-Premio BOND Promo Pack - Syringe

G-ænial® A’CHORD is a universal composite restorative with a simplified unishade system and the latest addition to the G-ænial range, the culmination of 10 years of clinical success, representing the ideal balance of simplicity, aesthetics and advanced technology in one product.

G-ænial A’CHORD offers dentists a versatile universal composite for anterior and posterior restorations. Thanks to its simplified unishade system, it achieves the aesthetics of the 16 classic Vita shades with its 5 core shades. It achieves invisible restorations with a reduced inventory and quick polishing which makes it not only time efficient but also cost effective.

G-ænial A’CHORD offers natural fluorescence created by its unique filler technology that mimics the reflection of natural light which results in invisible restorations both in natural daylight and in special lighting conditions (e.g. discotheques).

G-ænial A’CHORD offers an ideal non-sticky consistency. This is a result of the combination of a Bis-MEPP monomer and optimised filler-monomer, which allows the dentist to easily sculpt the material with a hand instrument or a brush.

The secret behind G-aenial A’CHORD is GC’s revolutionary proprietary technologies: Full-Coverage Silane Coating (FSC) and High Performance Pulverized CERASMART (HPC). The combination of these technologies with the monomers gives the material its high strength, low wear, gloss retention, low discoloration and excellent radiopacity.

G-Premio BOND

G-Premio BOND from GC is a one-component light-cured universal adhesive with excellent bond strength and stability to both enamel and dentin

One-bottle universal bonding compatible with all etching modes and which can be used not only for direct bonding, but also for repair cases & hypersensitivity treatment.
G-Premio BOND offers the advantages of a universal but with a top performance in all situations.

• Excellent bond strength and stability to both enamel and dentin.
• Extremely thin film thickness of 3µm to guarantee durable aesthetics.
• Easy procedure featuring a very low technique sensitivity.
• Working time of 7 minutes in its dedicated dish for stress-free working.

Contents

• 2 x A2 Syringe of G-ænial A’CHORD
• 2 x A3 Syringe of G-ænial A’CHORD 
• 1 x 5ml bottle of G-Premio BOND

G-aenial A'CHORD & G-Premio BOND Promo Pack - Unitip

G-ænial® A’CHORD is a universal composite restorative with a simplified unishade system and the latest addition to the G-ænial range, the culmination of 10 years of clinical success, representing the ideal balance of simplicity, aesthetics and advanced technology in one product.

G-ænial A’CHORD offers dentists a versatile universal composite for anterior and posterior restorations. Thanks to its simplified unishade system, it achieves the aesthetics of the 16 classic Vita shades with its 5 core shades. It achieves invisible restorations with a reduced inventory and quick polishing which makes it not only time efficient but also cost effective.

G-ænial A’CHORD offers natural fluorescence created by its unique filler technology that mimics the reflection of natural light which results in invisible restorations both in natural daylight and in special lighting conditions (e.g. discotheques).

G-ænial A’CHORD offers an ideal non-sticky consistency. This is a result of the combination of a Bis-MEPP monomer and optimised filler-monomer, which allows the dentist to easily sculpt the material with a hand instrument or a brush.

The secret behind G-aenial A’CHORD is GC’s revolutionary proprietary technologies: Full-Coverage Silane Coating (FSC) and High Performance Pulverized CERASMART (HPC). The combination of these technologies with the monomers gives the material its high strength, low wear, gloss retention, low discoloration and excellent radiopacity.

G-Premio BOND

G-Premio BOND from GC is a one-component light-cured universal adhesive with excellent bond strength and stability to both enamel and dentin

One-bottle universal bonding compatible with all etching modes and which can be used not only for direct bonding, but also for repair cases & hypersensitivity treatment.
G-Premio BOND offers the advantages of a universal but with a top performance in all situations.

• Excellent bond strength and stability to both enamel and dentin.
• Extremely thin film thickness of 3µm to guarantee durable aesthetics.
• Easy procedure featuring a very low technique sensitivity.
• Working time of 7 minutes in its dedicated dish for stress-free working.

Contents

• 30 x A2 unitips of G-ænial A’CHORD
• 30 x A3 unitips of G-ænial A’CHORD 
• 1 x 5ml bottle of G-Premio BOND

G-aenial Universal Injectable Syringe & G-Premio BOND Promo Pack

G-aenial Universal Injectable from GC is a high strength restorative composite that is suitable for any cavity class and strong enough without the need to cover with a conventional composite.

G-aenial Universal Injectable is ideal for many techniques thanks to its high thixotropy, enabling it to either stay in place or flow nicely depending on the constraint applied on the material. It is for instance very interesting to use for free-hand cusp build-up, Class III or V restorations or in the stent technique together with a transparent silicone.

Stop covering!

• Exceptional strength & wear resistance thanks to the combination of ultra-fine Barium fillers & GC’s Full-coverage Silane Coating (FSC) technology
• Suitable for any cavity class without size limitation
• Strong enough without the need to cover with a conventional composite

Start injecting!

• Unique thixotropic viscosity, optimal for free-hand build-up of cusps
• Shorter finishing steps as the anatomy is already created

Enjoy the handling!

• New syringe design featuring easy extrusion & no uncontrolled flow-out
• Optimal viscosity to easily separate the material from the tip
• New tips with a long bendable needle for unparalleled access to difficult posterior cavities

Features

• Suitable for all cavity classes without covering
• Optimal viscosity for restorative indications
• Perfect syringe design to simplify application
• High radiopacity for optimal follow up
• Superb and long lasting aesthetics

G-Premio BOND

G-Premio BOND from GC is a one-component light-cured universal adhesive with excellent bond strength and stability to both enamel and dentin

One-bottle universal bonding compatible with all etching modes and which can be used not only for direct bonding, but also for repair cases & hypersensitivity treatment.
G-Premio BOND offers the advantages of a universal but with a top performance in all situations.

• Excellent bond strength and stability to both enamel and dentin.
• Extremely thin film thickness of 3µm to guarantee durable aesthetics.
• Easy procedure featuring a very low technique sensitivity.
• Working time of 7 minutes in its dedicated dish for stress-free working.

Contents

• 1 x 1ml G-ænial Universal Injectable Syringe shade A1
• 1 x 1ml G-ænial Universal Injectable Syringe shade A2
• 1 x 1ml G-ænial Universal Injectable Syringe shade A3
• 1 x 5ml G-Premio BOND
• 20 x Dispensing tips
• 30 x Long needles
• 3 x Light protective caps

Zipbond Universal: Bottle Kit

Zipbond Universal from SDI is a single component fluoride releasing universal adhesive, compatible with self etch, selective etch and total etch techniques. In the presence of varied tooth structure and an abundance of restorative choices, Zipbond Universal achieves reproducible and reliable bond strengths.

Indications

Direct Applications

• Light cured composite restorations
• Light cured compomers
• Cavity sealing prior to placement of indirect restorations
• Composite repair of porcelain and hybrid ceramic restorations
• Sealing exposed root surfaces which are causing hypersensitivity
• Core build ups using light cure/dual cure composites
• Protective varnish for glass ionomer (GI) filling

Indirect Applications

• Cementation indirect restorations

Features

Consistent Bond Strengths

Zipbond Universal achieves successful bond strengths across dentine and enamel using self etch and total etch techniques.

Total etch is considered the best option for enamel only preparations2. Zipbond Universal has minimal fluctuation in bond strength using the total etch technique on enamel, demonstrating the ability to achieve predictable results in each use.

The heterogenous nature of dentine and variability in mineral and water content adds complexity to dentine bonding1. The carefully selected chemistry of Zipbond Universal overcomes the challenges associated with dentine bonding to provide strong and reproducible bond strengths in self etch and total tech techniques.

Select Zipbond Universal for consistent adhesion, predictable clinical outcomes and confidence in the interface between your patients tooth and restoration.

Wet and dry dentine bonding

Variation in surface moisture of dentine can affect bond strength2. Zipbond Universal achieves similar bond strengths when applied to wet and dry dentine, reducing technique sensitivity. Even in situations where dentine has been over-dried, Zipbond Universal will still form a hybrid layer, further mitigating technique sensitivity.

Zipbond Universal: Bottle Refill - 5ml

Zipbond Universal from SDI is a single component fluoride releasing universal adhesive, compatible with self etch, selective etch and total etch techniques. In the presence of varied tooth structure and an abundance of restorative choices, Zipbond Universal achieves reproducible and reliable bond strengths.

Indications

Direct Applications

• Light cured composite restorations
• Light cured compomers
• Cavity sealing prior to placement of indirect restorations
• Composite repair of porcelain and hybrid ceramic restorations
• Sealing exposed root surfaces which are causing hypersensitivity
• Core build ups using light cure/dual cure composites
• Protective varnish for glass ionomer (GI) filling

Indirect Applications

• Cementation indirect restorations

Features

Consistent Bond Strengths

Zipbond Universal achieves successful bond strengths across dentine and enamel using self etch and total etch techniques.

Total etch is considered the best option for enamel only preparations2. Zipbond Universal has minimal fluctuation in bond strength using the total etch technique on enamel, demonstrating the ability to achieve predictable results in each use.

The heterogenous nature of dentine and variability in mineral and water content adds complexity to dentine bonding1. The carefully selected chemistry of Zipbond Universal overcomes the challenges associated with dentine bonding to provide strong and reproducible bond strengths in self etch and total tech techniques.

Select Zipbond Universal for consistent adhesion, predictable clinical outcomes and confidence in the interface between your patients tooth and restoration.

Wet and dry dentine bonding

Variation in surface moisture of dentine can affect bond strength2. Zipbond Universal achieves similar bond strengths when applied to wet and dry dentine, reducing technique sensitivity. Even in situations where dentine has been over-dried, Zipbond Universal will still form a hybrid layer, further mitigating technique sensitivity.

Zipbond Universal: SingleDose Kit

Zipbond Universal from SDI is a single component fluoride releasing universal adhesive, compatible with self etch, selective etch and total etch techniques. In the presence of varied tooth structure and an abundance of restorative choices, Zipbond Universal achieves reproducible and reliable bond strengths.

Indications

Direct Applications

• Light cured composite restorations
• Light cured compomers
• Cavity sealing prior to placement of indirect restorations
• Composite repair of porcelain and hybrid ceramic restorations
• Sealing exposed root surfaces which are causing hypersensitivity
• Core build ups using light cure/dual cure composites
• Protective varnish for glass ionomer (GI) filling

Indirect Applications

• Cementation indirect restorations

Features

Consistent Bond Strengths

Zipbond Universal achieves successful bond strengths across dentine and enamel using self etch and total etch techniques.

Total etch is considered the best option for enamel only preparations2. Zipbond Universal has minimal fluctuation in bond strength using the total etch technique on enamel, demonstrating the ability to achieve predictable results in each use.

The heterogenous nature of dentine and variability in mineral and water content adds complexity to dentine bonding1. The carefully selected chemistry of Zipbond Universal overcomes the challenges associated with dentine bonding to provide strong and reproducible bond strengths in self etch and total tech techniques.

Select Zipbond Universal for consistent adhesion, predictable clinical outcomes and confidence in the interface between your patients tooth and restoration.

Wet and dry dentine bonding

Variation in surface moisture of dentine can affect bond strength2. Zipbond Universal achieves similar bond strengths when applied to wet and dry dentine, reducing technique sensitivity. Even in situations where dentine has been over-dried, Zipbond Universal will still form a hybrid layer, further mitigating technique sensitivity.

• Class I to V restorations
• Base in class I and II cavities
• Reconstruction of traumatically damaged anteriors
• Facetting of discoloured anteriors
• Correction of shape and shade for improved aesthetic appearance
• Locking, splinting of loose anteriors
• Repairing veneers, small enamel defects and temporary C&B-materials
• Extended fissure sealing
• Restoration of deciduous teeth
• Core build-up
• Composite inlays

• The worldwide first purely ceramic-based restorative material
  – Pure Silicate Technology, i.e., fillers and resin matrix based purely on silicon oxide
  – Contains no classic monomers
• Thanks to the most innovative ORMOCER® technology
  – By far the lowest polymerisation shrinkage (1.25 % by volume) and particularly low level of shrinkage stress in comparison to all conventional restorative composites
  – Inert, so highly biocompatible and extremely resistant to discolouration
• Completely universal – meeting highest demands in anterior and posterior regions
  – Perfect coordination of translucence with opacity for natural results
  – The optimal selection of shades enables highly flexible working using either the single or multiple shade system
• Excellent handling, simple high-lustre polishing procedure coupled with high surface hardness guarantee first-class long-term results
• Compatible with all conventional bonding agents

• 5 x 3g assorted syringes (A2, A3, GA3.25, A3.5, Admira Fusion x-tra)
• 20 x Futurabond U SingleDoses
•  accessories & shade guide

VisCalor: Set + Bond - 80 x 0.25g

VisCalor from Voco is a thermoviscous, universal restorative material that is flowable during application and can be sculpted immediately afterwards.

• Unique and innovative: By pre-warming, the material is flowable during application and can be sculpted immediately afterwards (Thermo-Viscous-Technology).
• Excellent handling: Bubble-free application with a narrow and long cannula - optimal for hard-to-reach areas.
• High quality and durable: Optimal flowing to margins and undercut regions.
• Excellent physical properties.
• No need to change materials thanks to the combination of two levels of viscosity in one material.
• No overlaying necessary.
• High aesthetics: 11 shades with optimal colouration.

Indications

• Class I to V restorations.
• Base fill (restoration base) in Class I and II cavities.
• Reconstruction of anterior teeth damaged by trauma.
• Veneering discoloured anterior teeth.
• Corrections in shape and shade to improve aesthetics.
• Interlocking, splinting of loose teeth.
• Repairing of veneers, enamel defects, and temporary C&B materials.
• Extended fissure sealing.
• Restoration of deciduous teeth.
• Core build-up.
• Composite inlays.

Contents

• 80 x 0.25g Viscalor Caps (16 × A1, 16 × A2, 32 × A3, 16 × A3.5)
• 1 x VisCalor shade guide
• 20 x Futurabond U SingleDose

• Class I to V restorations
• Base in class I and II cavities
• Reconstruction of traumatically damaged anteriors
• Facetting of discoloured anteriors
• Correction of shape and shade for improved aesthetic appearance
• Locking, splinting of loose anteriors
• Repairing veneers, small enamel defects and temporary C&B-materials
• Extended fissure sealing
• Restoration of deciduous teeth
• Core build-up
• Composite inlays

• The worldwide first purely ceramic-based restorative material
  – Pure Silicate Technology, i.e., fillers and resin matrix based purely on silicon oxide
  – Contains no classic monomers
• Thanks to the most innovative ORMOCER® technology
  – By far the lowest polymerisation shrinkage (1.25 % by volume) and particularly low level of shrinkage stress in comparison to all conventional restorative composites
  – Inert, so highly biocompatible and extremely resistant to discolouration
• Completely universal – meeting highest demands in anterior and posterior regions
  – Perfect coordination of translucence with opacity for natural results
  – The optimal selection of shades enables highly flexible working using either the single or multiple shade system
• Excellent handling, simple high-lustre polishing procedure coupled with high surface hardness guarantee first-class long-term results
• Compatible with all conventional bonding agents

• 75 x 0.2g assorted capsules (15 each of A2, A3, GA3.25, A3.5, Admira Fusion x-tra)
• 20 x Futurabond U Single Doses
• accessories & shade guide

One Coat Self Etching Bond - Single Dose Kit

Contents

• 50 doses (0.1 ml primer and 0.1 ml bond)

G-Premio BOND: 5ml Bottle Kit

One-component light-cured universal adhesive.

One-bottle universal bonding compatible with all etching modes and which can be used not only for direct bonding, but also for repair cases & hypersensitivity treatment.
G-Premio BOND offers the advantages of a universal but with a top performance in all situations.

• Excellent bond strength and stability to both enamel and dentin.
• Extremely thin film thickness of 3µm to guarantee durable aesthetics.
• Easy procedure featuring a very low technique sensitivity.
• Working time of 7 minutes in its dedicated dish for stress-free working.

Contents

• 1 x 5ml bottle of G-Premio BOND,
• 50 x disposable applicators
• 20 x trays

G-Premio BOND: Unit Dose (50)

One-component light-cured universal adhesive.

One-bottle universal bonding compatible with all etching modes and which can be used not only for direct bonding, but also for repair cases & hypersensitivity treatment.
G-Premio BOND offers the advantages of a universal but with a top performance in all situations.

• Excellent bond strength and stability to both enamel and dentin.
• Extremely thin film thickness of 3µm to guarantee durable aesthetics.
• Easy procedure featuring a very low technique sensitivity.
• Working time of 7 minutes in its dedicated dish for stress-free working.

Contents

• 50 x 0.1ml unit doses of G-Premio BOND

Ecosite Bulk Fill: Bond - 5ml

Ecosite Bulk Fill Bond is a light-curing etch and rinse adhesive for direct restorations of all cavity classes as the perfect partner of Ecosite Bulk Fill

Ecosite Bond, a perfectly matched one-bottle universal bond, which allows practitioners free choice when conditioning. 

• Free choice of etching Modus
• Optimum bond strength in any situation
• Ideal for use with Ecosite Bulk Fill

Complete freedom

The Ecosite-Bond included in the starter kit is the ideal aid when working with a modern, easy to apply composite.

The light-curing 1-bottle universal bond gives you free choice when it comes to etching mode: total-etch, selective-etch or self-etch.

The choice is yours.

Ecosite-Bond is a self-etching, selective enamel etching and light-curing »etch and rinse« adhesive for direct restorations of all cavity classes with light-curing composite materials.

Regardless of whether phosphoric acid etching has been carried out beforehand, or quick self-etch mode is used, Ecosite-Bond demonstrates optimum bond strength in any situation!

Contents

• 1 x 5ml bottle of Ecosite Bulk Fill Bond

Clearfil Universal Bond Quick: Triple Pack 3 x 5ml

One-step adhesive for all your bonding and pre-treatment needs

CLEARFIL™ Universal Bond Quick takes you to the next step into bonding agents. Since CLEARFIL™ Universal Bond Quick does not need any waiting, multiple layers or extensive rubbing, it creates the possibility for uniform results and optimum adhesion, treatment after treatment.

All indications. One Bond.

The product reliably bonds all direct restorations, core build-ups and even indirect restorations and repairs. Simply use it the way you want: self-etch, selective-etch or total-etch. But whichever way, CLEARFIL™ Universal Bond Quick delivers the same uniform results without the need to wait.

PROCEDURAL FREEDOM

Unlike traditional dental bonding agents that require waiting time, extensive rubbing and multiple layers in order to deliver an optimum result, with CLEARFIL™ Universal Bond Quick your restorative procedures are carried out to the exceptionally high standards. Exceptional levels of adhesion result in a bond that lasts with minimal risk of remedial work. And, because there’s no need to wait before you proceed, procedures take less time than with most other available bondings, benefiting both patient and practitioner.

Aesthetic thin film layer

CLEARFIL™ Universal Bond Quick comprises a thin film layer of just 5 to 10 μm making it aesthetically pleasing even in the most demanding anterior restorations. Its innovative new amide monomers create many crosslinks to improve the stability of the thin film layer. This in turn delivers a superior bonding layer which is resistant to moisture and it shows good aesthetics at margin of anterior restorations.

Truly Universal Bond

CLEARFIL™ Universal Bond Quick can be used with almost all composite materials and also in cases where dual curing materials are required, for instance in post and core procedures. It acts as an excellent surface conditioner when priming indirect materials such as zirconia, glass-ceramics or metals or during intra-oral repairs.

Contents

3 bottles of bond (3 x 5ml)

Clearfil Universal Bond Quick: Unit Dose - 50 x 0.1ml

One-step adhesive for all your bonding and pre-treatment needs

CLEARFIL™ Universal Bond Quick takes you to the next step into bonding agents. Since CLEARFIL™ Universal Bond Quick does not need any waiting, multiple layers or extensive rubbing, it creates the possibility for uniform results and optimum adhesion, treatment after treatment.

All indications. One Bond.

The product reliably bonds all direct restorations, core build-ups and even indirect restorations and repairs. Simply use it the way you want: self-etch, selective-etch or total-etch. But whichever way, CLEARFIL™ Universal Bond Quick delivers the same uniform results without the need to wait.

PROCEDURAL FREEDOM

Unlike traditional dental bonding agents that require waiting time, extensive rubbing and multiple layers in order to deliver an optimum result, with CLEARFIL™ Universal Bond Quick your restorative procedures are carried out to the exceptionally high standards. Exceptional levels of adhesion result in a bond that lasts with minimal risk of remedial work. And, because there’s no need to wait before you proceed, procedures take less time than with most other available bondings, benefiting both patient and practitioner.

Aesthetic thin film layer

CLEARFIL™ Universal Bond Quick comprises a thin film layer of just 5 to 10 μm making it aesthetically pleasing even in the most demanding anterior restorations. Its innovative new amide monomers create many crosslinks to improve the stability of the thin film layer. This in turn delivers a superior bonding layer which is resistant to moisture and it shows good aesthetics at margin of anterior restorations.

Truly Universal Bond

CLEARFIL™ Universal Bond Quick can be used with almost all composite materials and also in cases where dual curing materials are required, for instance in post and core procedures. It acts as an excellent surface conditioner when priming indirect materials such as zirconia, glass-ceramics or metals or during intra-oral repairs.

Contents

• 50 x Bond Unit Dose (0.1 ml each)
• 1 x K-ETCHANT Syringe (3ml)
• 50 x Applicator brushes
• 20 x Needle Tips