Aquasil Ultra+ Heavy DECA Fast Set - 2 x 380ml

Aquasil Ultra+ Smart Wetting Impression Material in the DECA Delivery System is a final VPS impression material indicated for use in all impression techniques.

With market leading intraoral hydrophilicity and intraoral tear strength, Aquasil Ultra+ material is optimized to perform when clinicians need it most, while in the challenging oral environment, enabling high detail reproduction while minimizing risks of voids and tears. Aquasil Ultra+ material is available in multiple viscosities, work/set times, and delivery options.

Aquasil Ultra+ material provides clinicians with a full range of performance and choices to satisfy a wide range of impression situations.

PROPERTIES

• Improved hydrophilicity for the intraoral environment designed to avoid trapping fluids to minimize errors from voids and bubbles.
• New patented cross linkers give the markets highest tear strength in even the thinnest cross-sections (intraoral tear strength).
• Mint flavour for a more pleasant patience experience.
• Aquasil Ultra+ Putty has been formulated to be less sticky, giving a different consistency to the previous Aquasil Ultra Putty.

CONTENTS

• 2 x 380 ml Aquasil Ultra+ Medium Regular Set Tray Material (Light Green)
• 20 x Dynamic Mixing Tips
• 1 x Bayonet Ring
• 1 x Instructions for Use

Aquasil Ultra+ Heavy Regular Set - 4 x 50ml

Aquasil Ultra+ Smart Wetting Impression Material is a final VPS impression material indicated for use in all impression techniques.

With market leading intraoral hydrophilicity and intraoral tear strength, Aquasil Ultra+ material is optimized to perform when clinicians need it most, while in the challenging oral environment, enabling high detail reproduction while minimizing risks of voids and tears. Aquasil Ultra+ material is available in multiple viscosities, work/set times, and delivery options.

Aquasil Ultra+ material provides clinicians with a full range of performance and choices to satisfy a wide range of impression situations.

PROPERTIES

• Improved hydrophilicity for the intraoral environment designed to avoid trapping fluids to minimize errors from voids and bubbles.
• New patented cross linkers give the markets highest tear strength in even the thinnest cross-sections (intraoral tear strength).
• Mint flavour for a more pleasant patience experience.
• Aquasil Ultra+ Putty has been formulated to be less sticky, giving a different consistency to the previous Aquasil Ultra Putty.

CONTENTS

• 4 x 50ml cartridges
• 12 x Mixing Tips 
• 12 x Intra oral Tips
• 1 x Instructions for Use

President The Original: Xtra Light Body - microSystem 4 x 25ml

A small step for dentists. A great step for dentistry.

The introduction of PRESIDENT in 1975 – the first A-Silicone in the market – is considered a milestone in the development of high-precision dental impression materials.

Still today the brand convinces with its sovereign quality.

On the occasion of the 40th anniversary of PRESIDENT, the first A-Silicone line was relaunched under the new brand name PRESIDENT The Original with improved characteristics.

New colors

The new, fresh colours of the PRESIDENT line provide a better contrast between wash and tray material and thus show more accurate detail readability.

New materials

The tray portfolio of new PRESIDENT contains beside the common materials two additional viscosities: MonoBody and putty super soft. With the line extension of the monophase material MonoBody, implant impressions can be done even more precisely. In addition, the new putty super soft is very smooth and easy to mix.

The new wash material portfolio of PRESIDENT offers beside light body and regular body one additional viscosity: Xtra light body

As indicated by the name, Xtra light body is a very fluid wash material which can be used to capture even marginal details as it flows into the narrowest areas without dripping from the tooth.

Contents

• 4 x 25ml cartridges
• 12 x mixing tips
• Instructions for use

A small step for dentists. A great step for dentistry.

The introduction of PRESIDENT in 1975 – the first A-Silicone in the market – is considered a milestone in the development of high-precision dental impression materials.

Still today the brand convinces with its sovereign quality.

On the occasion of the 40th anniversary of PRESIDENT, the first A-Silicone line was relaunched under the new brand name PRESIDENT The Original with improved characteristics.

New colors

The new, fresh colours of the PRESIDENT line provide a better contrast between wash and tray material and thus show more accurate detail readability.

New materials

The tray portfolio of new PRESIDENT contains beside the common materials two additional viscosities: MonoBody and putty super soft. With the line extension of the monophase material MonoBody, implant impressions can be done even more precisely. In addition, the new putty super soft is very smooth and easy to mix.

The new wash material portfolio of PRESIDENT offers beside light body and regular body one additional viscosity: Xtra light body

As indicated by the name, Xtra light body is a very fluid wash material which can be used to capture even marginal details as it flows into the narrowest areas without dripping from the tooth.

Contents

• 1 x 53g tube of base
• 1 x 53g tube of catalyst

President The Original: Regular Body - microSystem 20 x 25ml

A small step for dentists. A great step for dentistry.

The introduction of PRESIDENT in 1975 – the first A-Silicone in the market – is considered a milestone in the development of high-precision dental impression materials.

Still today the brand convinces with its sovereign quality.

On the occasion of the 40th anniversary of PRESIDENT, the first A-Silicone line was relaunched under the new brand name PRESIDENT The Original with improved characteristics.

New colors

The new, fresh colours of the PRESIDENT line provide a better contrast between wash and tray material and thus show more accurate detail readability.

New materials

The tray portfolio of new PRESIDENT contains beside the common materials two additional viscosities: MonoBody and putty super soft. With the line extension of the monophase material MonoBody, implant impressions can be done even more precisely. In addition, the new putty super soft is very smooth and easy to mix.

The new wash material portfolio of PRESIDENT offers beside light body and regular body one additional viscosity: Xtra light body

As indicated by the name, Xtra light body is a very fluid wash material which can be used to capture even marginal details as it flows into the narrowest areas without dripping from the tooth.

Contents

• 20 x 25ml cartridges
• Instructions for use

Aquasil Ultra+ XLV Fast Set - 4 x 50ml

Aquasil Ultra+ Smart Wetting Impression Material is a final VPS impression material indicated for use in all impression techniques.

With market leading intraoral hydrophilicity and intraoral tear strength, Aquasil Ultra+ material is optimized to perform when clinicians need it most, while in the challenging oral environment, enabling high detail reproduction while minimizing risks of voids and tears. Aquasil Ultra+ material is available in multiple viscosities, work/set times, and delivery options.

Aquasil Ultra+ material provides clinicians with a full range of performance and choices to satisfy a wide range of impression situations.

PROPERTIES

• Improved hydrophilicity for the intraoral environment designed to avoid trapping fluids to minimize errors from voids and bubbles.
• New patented cross linkers give the markets highest tear strength in even the thinnest cross-sections (intraoral tear strength).
• Mint flavour for a more pleasant patience experience.
• Aquasil Ultra+ Putty has been formulated to be less sticky, giving a different consistency to the previous Aquasil Ultra Putty.

CONTENTS

• 4 x 50ml cartridges
• 12 x Mixing Tips 
• 12 x Intra oral Tips
• 1 x Instructions for Use

Aquasil Ultra+ XLV Regular Set - 4 x 50ml

Aquasil Ultra+ Smart Wetting Impression Material is a final VPS impression material indicated for use in all impression techniques.

With market leading intraoral hydrophilicity and intraoral tear strength, Aquasil Ultra+ material is optimized to perform when clinicians need it most, while in the challenging oral environment, enabling high detail reproduction while minimizing risks of voids and tears. Aquasil Ultra+ material is available in multiple viscosities, work/set times, and delivery options.

Aquasil Ultra+ material provides clinicians with a full range of performance and choices to satisfy a wide range of impression situations.

PROPERTIES

• Improved hydrophilicity for the intraoral environment designed to avoid trapping fluids to minimize errors from voids and bubbles.
• New patented cross linkers give the markets highest tear strength in even the thinnest cross-sections (intraoral tear strength).
• Mint flavour for a more pleasant patience experience.
• Aquasil Ultra+ Putty has been formulated to be less sticky, giving a different consistency to the previous Aquasil Ultra Putty.

CONTENTS

• 4 x 50ml cartridges
• 12 x Mixing Tips 
• 12 x Intra oral Tips
• 1 x Instructions for Use

President The Original: Light Body - 2 x 53ml Tubes

A small step for dentists. A great step for dentistry.

The introduction of PRESIDENT in 1975 – the first A-Silicone in the market – is considered a milestone in the development of high-precision dental impression materials.

Still today the brand convinces with its sovereign quality.

On the occasion of the 40th anniversary of PRESIDENT, the first A-Silicone line was relaunched under the new brand name PRESIDENT The Original with improved characteristics.

New colors

The new, fresh colours of the PRESIDENT line provide a better contrast between wash and tray material and thus show more accurate detail readability.

New materials

The tray portfolio of new PRESIDENT contains beside the common materials two additional viscosities: MonoBody and putty super soft. With the line extension of the monophase material MonoBody, implant impressions can be done even more precisely. In addition, the new putty super soft is very smooth and easy to mix.

The new wash material portfolio of PRESIDENT offers beside light body and regular body one additional viscosity: Xtra light body

As indicated by the name, Xtra light body is a very fluid wash material which can be used to capture even marginal details as it flows into the narrowest areas without dripping from the tooth.

Contents

• 1 x 53g tube of base
• 1 x 53g tube of catalyst

Aquasil Ultra+ Medium Regular Set - 4 x 50ml

Aquasil Ultra+ Smart Wetting Impression Material is a final VPS impression material indicated for use in all impression techniques.

With market leading intraoral hydrophilicity and intraoral tear strength, Aquasil Ultra+ material is optimized to perform when clinicians need it most, while in the challenging oral environment, enabling high detail reproduction while minimizing risks of voids and tears. Aquasil Ultra+ material is available in multiple viscosities, work/set times, and delivery options.

Aquasil Ultra+ material provides clinicians with a full range of performance and choices to satisfy a wide range of impression situations.

PROPERTIES

• Improved hydrophilicity for the intraoral environment designed to avoid trapping fluids to minimize errors from voids and bubbles.
• New patented cross linkers give the markets highest tear strength in even the thinnest cross-sections (intraoral tear strength).
• Mint flavour for a more pleasant patience experience.
• Aquasil Ultra+ Putty has been formulated to be less sticky, giving a different consistency to the previous Aquasil Ultra Putty.

CONTENTS

• 4 x 50ml cartridges
• 12 x Mixing Tips 
• 12 x Intra oral Tips
• 1 x Instructions for Use

President The Original: Light Body - 2 x 50ml

A small step for dentists. A great step for dentistry.

The introduction of PRESIDENT in 1975 – the first A-Silicone in the market – is considered a milestone in the development of high-precision dental impression materials.

Still today the brand convinces with its sovereign quality.

On the occasion of the 40th anniversary of PRESIDENT, the first A-Silicone line was relaunched under the new brand name PRESIDENT The Original with improved characteristics.

New colors

The new, fresh colours of the PRESIDENT line provide a better contrast between wash and tray material and thus show more accurate detail readability.

New materials

The tray portfolio of new PRESIDENT contains beside the common materials two additional viscosities: MonoBody and putty super soft. With the line extension of the monophase material MonoBody, implant impressions can be done even more precisely. In addition, the new putty super soft is very smooth and easy to mix.

The new wash material portfolio of PRESIDENT offers beside light body and regular body one additional viscosity: Xtra light body

As indicated by the name, Xtra light body is a very fluid wash material which can be used to capture even marginal details as it flows into the narrowest areas without dripping from the tooth.

Contents

• 2 x 50ml cartridges
• 12 x mixing tips

Aquasil Ultra+ LV Fast Set - 4 x 50ml

Aquasil Ultra+ Smart Wetting Impression Material is a final VPS impression material indicated for use in all impression techniques.

With market leading intraoral hydrophilicity and intraoral tear strength, Aquasil Ultra+ material is optimized to perform when clinicians need it most, while in the challenging oral environment, enabling high detail reproduction while minimizing risks of voids and tears. Aquasil Ultra+ material is available in multiple viscosities, work/set times, and delivery options.

Aquasil Ultra+ material provides clinicians with a full range of performance and choices to satisfy a wide range of impression situations.

PROPERTIES

• Improved hydrophilicity for the intraoral environment designed to avoid trapping fluids to minimize errors from voids and bubbles.
• New patented cross linkers give the markets highest tear strength in even the thinnest cross-sections (intraoral tear strength).
• Mint flavour for a more pleasant patience experience.
• Aquasil Ultra+ Putty has been formulated to be less sticky, giving a different consistency to the previous Aquasil Ultra Putty.

CONTENTS

• 4 x 50ml cartridges
• 12 x Mixing Tips 
• 12 x Intra oral Tips
• 1 x Instructions for Use

President The Original: Regular Body - 2 x 50ml

A small step for dentists. A great step for dentistry.

The introduction of PRESIDENT in 1975 – the first A-Silicone in the market – is considered a milestone in the development of high-precision dental impression materials.

Still today the brand convinces with its sovereign quality.

On the occasion of the 40th anniversary of PRESIDENT, the first A-Silicone line was relaunched under the new brand name PRESIDENT The Original with improved characteristics.

New colors

The new, fresh colours of the PRESIDENT line provide a better contrast between wash and tray material and thus show more accurate detail readability.

New materials

The tray portfolio of new PRESIDENT contains beside the common materials two additional viscosities: MonoBody and putty super soft. With the line extension of the monophase material MonoBody, implant impressions can be done even more precisely. In addition, the new putty super soft is very smooth and easy to mix.

The new wash material portfolio of PRESIDENT offers beside light body and regular body one additional viscosity: Xtra light body

As indicated by the name, Xtra light body is a very fluid wash material which can be used to capture even marginal details as it flows into the narrowest areas without dripping from the tooth.

Contents

• 2 x 50ml cartridges
• 12 x mixing tips

V-Posil: Starter Set - Mono Fast & Light Fast

Precision impressions are a means of communication between the dentist and dental technician. Any imprecisions in an impression will transfer to the models, and can often go unnoticed until the final prosthesis is being fitted.

Precise dental restorations require a material with properties that support optimal impression taking, from the very outset and right through to the pouring stage.

V-Posil was developed with the aim of creating a material that consistently lives up to this service philosophy, in order to combine:

• Clinically relevant parameters
• Treatment convenience
• Patient comfort

Indications

V-Posil Mono Fast is to be used as a medium bodied tray or syringeable impression material for:

• Taking impressions over fixed/removable restorations and implants (i.e., transferring impression posts and bridge components)
• Functional impressions
• Fabricating crown and bridgework or inlays
• Fabricating full or partial dentures
• Reline impressions
• Transferring root posts when fabricating posts and cores indirectly
• Multi tray technique
• Use in the simultaneous mixing technique as well as the putty-wash technique

V-Posil Light Fast is to be used as syringeable impression materials for:

• Two-step putty-wash impression technique
• One-step putty-wash impression technique
• One-step impression technique using a foil (plastic putty spacer)
• One-step impression technique (simultaneous technique) using dual viscosities
• Reline impressions
• Fabricating full or partial dentures

Advantages

• Highly hydrophilic A-silicone for maximum precision
• High dimensional accuracy
• Long working time combined with a short intraoral setting time
• High recovery after deformation
• Good hydrophilicity, even after setting, renders pouring and thus the prosthetic restoration perfect

Contents

• 2 x 50ml Light Fast cartridges
• 6 x mixing tips
• 6 x intra oral tips
• 2 x 380ml Mono Fast cartridges
• 20 x mixing tips

President The Original: Xtra Light Body - 2 x 50ml

A small step for dentists. A great step for dentistry.

The introduction of PRESIDENT in 1975 – the first A-Silicone in the market – is considered a milestone in the development of high-precision dental impression materials.

Still today the brand convinces with its sovereign quality.

On the occasion of the 40th anniversary of PRESIDENT, the first A-Silicone line was relaunched under the new brand name PRESIDENT The Original with improved characteristics.

New colors

The new, fresh colours of the PRESIDENT line provide a better contrast between wash and tray material and thus show more accurate detail readability.

New materials

The tray portfolio of new PRESIDENT contains beside the common materials two additional viscosities: MonoBody and putty super soft. With the line extension of the monophase material MonoBody, implant impressions can be done even more precisely. In addition, the new putty super soft is very smooth and easy to mix.

The new wash material portfolio of PRESIDENT offers beside light body and regular body one additional viscosity: Xtra light body

As indicated by the name, Xtra light body is a very fluid wash material which can be used to capture even marginal details as it flows into the narrowest areas without dripping from the tooth.

Contents

• 2 x 50ml cartridges
• 12 x mixing tips

Affinis Heavy Body (2 x 75ml)

The high consistency and rapid build up of pressure for AFFINIS heavy body produces strong compression, making this tray material ideal for the one-step putty/wash technique. Buccal and palatal areas can also be easily reproduced with AFFINIS heavy body.

Contents

• 2 x 75ml cartridges
• 8 x mixing tips

V-Posil: X-Light Fast - 2 x 50ml Cartridges

Precision impressions are a means of communication between the dentist and dental technician. Any imprecisions in an impression will transfer to the models, and can often go unnoticed until the final prosthesis is being fitted.

Precise dental restorations require a material with properties that support optimal impression taking, from the very outset and right through to the pouring stage.

V-Posil was developed with the aim of creating a material that consistently lives up to this service philosophy, in order to combine:

• Clinically relevant parameters
• Treatment convenience
• Patient comfort

Indications

V-Posil X-Light Fast is to be used as syringeable impression materials for:

• Two-step putty-wash impression technique
• One-step putty-wash impression technique
• One-step impression technique using a foil (plastic putty spacer)
• One-step impression technique (simultaneous technique) using dual viscosities
• Reline impressions
• Fabricating full or partial dentures

Advantages

• Highly hydrophilic A-silicone for maximum precision
• High dimensional accuracy
• Long working time combined with a short intraoral setting time
• High recovery after deformation
• Good hydrophilicity, even after setting, renders pouring and thus the prosthetic restoration perfect

Contents

• 2 x 50ml X-Light Fast cartridges

V-Posil: Light Fast - 2 x 50ml Cartridges

Precision impressions are a means of communication between the dentist and dental technician. Any imprecisions in an impression will transfer to the models, and can often go unnoticed until the final prosthesis is being fitted.

Precise dental restorations require a material with properties that support optimal impression taking, from the very outset and right through to the pouring stage.

V-Posil was developed with the aim of creating a material that consistently lives up to this service philosophy, in order to combine:

• Clinically relevant parameters
• Treatment convenience
• Patient comfort

Indications

V-Posil Light Fast is to be used as syringeable impression materials for:

• Two-step putty-wash impression technique
• One-step putty-wash impression technique
• One-step impression technique using a foil (plastic putty spacer)
• One-step impression technique (simultaneous technique) using dual viscosities
• Reline impressions
• Fabricating full or partial dentures

Advantages

• Highly hydrophilic A-silicone for maximum precision
• High dimensional accuracy
• Long working time combined with a short intraoral setting time
• High recovery after deformation
• Good hydrophilicity, even after setting, renders pouring and thus the prosthetic restoration perfect

Contents

• 2 x 50ml Light Fast cartridges

Elite HD+ Super Light Body Fast Set

Elite HD+ is an addition silicone that combines the effects of nanotechnology with hydro-compatibility, thus guaranteeing high performance in a variety of clinical conditions, even the most difficult.

• Hydrophilic with nano-fillers to improve fluidity and reduce air blows to enhance sulcus detail.
• Snap set minimises micro-movement.
• High visibility of detail – light colours with good contrast between putty/heavy and wash.

Contents

• 2 x 50ml cartridges (Base & Catalyst)
• 12 x yellow mixing tips

Provil Novo is a modular impression system that, due to its varying viscosities and setting times, is suited to all types of clinical situations.

Provil Novo is a material that belongs to the addition silicone family.

Improved cartridge system: separate base and catalyst outlet openings.

No risk of contamination between the 2 components.

Properties

• Modular system: Ideally blendable consistencies 
• Suited to all types of clinic situations 
• Adapts to any work habits 
• Used for all impression techniques

 Material

• High technical tolerance 
• Precise reproduction down to the slightest detail, even in a humid environment |
• Lasting dimensional stability 
• Hydroactivity: excellent wettability; does not absorb water; disinfection possible in an aqueous environment; plaster model with smooth surfaces and no bubbles.

Various viscosities 

• Putty (matter to be kneaded) 
• Putty Soft (matter to be kneaded) 
• Mono-phase (highly thixotropic) 
• Medium (thixotropic) 
• Light (very low viscosity) 

Each viscosity comes in fast set or regular set.

Indications

• Wash technique 
• Double mixing 
• Sandwich technique 
• Functional impression 
• Situation impression

New cartridge system

• Separate base and catalyst outlet openings 
• No risk of contamination between the two components 
• Cartridges can be resealed with capsule

Contents

• 2 x 50ml cartridges

Provil Novo is a modular impression system that, due to its varying viscosities and setting times, is suited to all types of clinical situations.

Provil Novo is a material that belongs to the addition silicone family.

Improved cartridge system: separate base and catalyst outlet openings.

No risk of contamination between the 2 components.

Properties

• Modular system: Ideally blendable consistencies 
• Suited to all types of clinic situations 
• Adapts to any work habits 
• Used for all impression techniques

 Material

• High technical tolerance 
• Precise reproduction down to the slightest detail, even in a humid environment |
• Lasting dimensional stability 
• Hydroactivity: excellent wettability; does not absorb water; disinfection possible in an aqueous environment; plaster model with smooth surfaces and no bubbles.

Various viscosities 

• Putty (matter to be kneaded) 
• Putty Soft (matter to be kneaded) 
• Mono-phase (highly thixotropic) 
• Medium (thixotropic) 
• Light (very low viscosity) 

Each viscosity comes in fast set or regular set.

Indications

• Wash technique 
• Double mixing 
• Sandwich technique 
• Functional impression 
• Situation impression

New cartridge system

• Separate base and catalyst outlet openings 
• No risk of contamination between the two components 
• Cartridges can be resealed with capsule

Contents

• 2 x 50ml cartridges

Provil Novo: Monophase Fast (2x50ml)

Provil Novo is a modular impression system that, due to its varying viscosities and setting times, is suited to all types of clinical situations.

Provil Novo is a material that belongs to the addition silicone family.

Improved cartridge system: separate base and catalyst outlet openings.

No risk of contamination between the 2 components.

Properties

• Modular system: Ideally blendable consistencies 
• Suited to all types of clinic situations 
• Adapts to any work habits 
• Used for all impression techniques

 Material

• High technical tolerance 
• Precise reproduction down to the slightest detail, even in a humid environment |
• Lasting dimensional stability 
• Hydroactivity: excellent wettability; does not absorb water; disinfection possible in an aqueous environment; plaster model with smooth surfaces and no bubbles.

Various viscosities 

• Putty (matter to be kneaded) 
• Putty Soft (matter to be kneaded) 
• Mono-phase (highly thixotropic) 
• Medium (thixotropic) 
• Light (very low viscosity) 

Each viscosity comes in fast set or regular set.

Indications

• Wash technique 
• Double mixing 
• Sandwich technique 
• Functional impression 
• Situation impression

New cartridge system

• Separate base and catalyst outlet openings 
• No risk of contamination between the two components 
• Cartridges can be resealed with capsule

Contents

• 2 x 50ml cartridges

Provil Novo is a modular impression system that, due to its varying viscosities and setting times, is suited to all types of clinical situations.

Provil Novo is a material that belongs to the addition silicone family.

Improved cartridge system: separate base and catalyst outlet openings.

No risk of contamination between the 2 components.

Properties

• Modular system: Ideally blendable consistencies 
• Suited to all types of clinic situations 
• Adapts to any work habits 
• Used for all impression techniques

 Material

• High technical tolerance 
• Precise reproduction down to the slightest detail, even in a humid environment |
• Lasting dimensional stability 
• Hydroactivity: excellent wettability; does not absorb water; disinfection possible in an aqueous environment; plaster model with smooth surfaces and no bubbles.

Various viscosities 

• Putty (matter to be kneaded) 
• Putty Soft (matter to be kneaded) 
• Mono-phase (highly thixotropic) 
• Medium (thixotropic) 
• Light (very low viscosity) 

Each viscosity comes in fast set or regular set.

Indications

• Wash technique 
• Double mixing 
• Sandwich technique 
• Functional impression 
• Situation impression

New cartridge system

• Separate base and catalyst outlet openings 
• No risk of contamination between the two components 
• Cartridges can be resealed with capsule

Contents

• 2 x 50ml cartridges

Provil Novo is a modular impression system that, due to its varying viscosities and setting times, is suited to all types of clinical situations.

Provil Novo is a material that belongs to the addition silicone family.

Improved cartridge system: separate base and catalyst outlet openings.

No risk of contamination between the 2 components.

Properties

• Modular system: Ideally blendable consistencies 
• Suited to all types of clinic situations 
• Adapts to any work habits 
• Used for all impression techniques

 Material

• High technical tolerance 
• Precise reproduction down to the slightest detail, even in a humid environment |
• Lasting dimensional stability 
• Hydroactivity: excellent wettability; does not absorb water; disinfection possible in an aqueous environment; plaster model with smooth surfaces and no bubbles.

Various viscosities 

• Putty (matter to be kneaded) 
• Putty Soft (matter to be kneaded) 
• Mono-phase (highly thixotropic) 
• Medium (thixotropic) 
• Light (very low viscosity) 

Each viscosity comes in fast set or regular set.

Indications

• Wash technique 
• Double mixing 
• Sandwich technique 
• Functional impression 
• Situation impression

New cartridge system

• Separate base and catalyst outlet openings 
• No risk of contamination between the two components 
• Cartridges can be resealed with capsule

Contents

• 2 x 50ml cartridges

Elite HD+ is an addition silicone that combines the effects of nanotechnology with hydro-compatibility, thus guaranteeing high performance in a variety of clinical conditions, even the most difficult.

• Hydrophilic with nano-fillers to improve fluidity and reduce air blows to enhance sulcus detail.
• Snap set minimises micro-movement.
• High visibility of detail – light colours with good contrast between putty/heavy and wash. 

Contents

• 2 x 50ml cartridges (Base & Catalyst)
• 12 x yellow mixing tips